INCA DC333 The expandable fireproof paint in water base for both interior and exterior. INCA DC68 Interior furniture and artificial fabrics are the number one **tributing factors to hearth unfold and smoke era at this time. Rinse Method : All weight fabrics ** be dipped or rinsed processed. Another object is to supply a te**ique of **structing tape having a number of of the above traits. Spray Method : Lightweight fabrics: Should be sprayed as soon as on each side. Medium and heavy weight fabrics: Should be sprayed two or extra times on every aspect. The principle motive for it is because the polyester movie and adhesive coating thereon is thinner and fewer de**han the **paratively heavy unvul**ized rubber or neoprene barrier coating calendered on the prior tapes. When the tape is **structed in this vogue, the polyester film 24 therein is **siderably steady and devoid of pinholes and presents a **tinuous, smooth surface in order that the tape 14 might be served from a roll with out the film adhering to itself and picking off from the scrim. When the tape is **structed on this style, the polyester movie 24 therein is **siderably steady and devoid of pinholes and presents a **tinuous, clean surface in order that the tape 14 may be served from a roll with out the film adhering to itself and choosing off from the scrim.

In a typical tape, the polyester film 24 is on the order of 0.5 mil thick and the adhesive layer is just on the order of 0.2 to 0.3 mil in thi**ess. In a typical tape, the polyester film 24 is on the order of 0.5 mil thick and the adhesive layer is only on the order of 0.2 to 0.3 mil in thi**ess. Then the coated movie and scrim 22 are regularly brought collectively in a drying oven so that the two grow to be bonded together. Rather, as identified above, the scrim 22 is maintained be**h a higher tension than the film in the drying oven. Rather, the scrim 22 and coated movie 24 are maintained under**h different lengthwise tensions which causes the two to be urged together in the drying oven with the result that they grow to be firmly bonded to each other. Then the coated film and scrim 22 are steadily introduced together in a drying oven in order that the 2 change into bonded together.

During this bonding course of, the coated movie and scrim are usually not pressed along with any nice amount of force. In actual follow, the barrier layer tends to "decide off" from the cloth as the tape is unwound from the roll and it additionally undergoes a specific amount of cold movement. Also, the unvul**ized rubber-coated glass cloth is applied to the **ductors in the form of tape which is unwound from a roll. A barrier layer in the type of a skim coat of flame-retardant unvul**ized polychloroprene is calendered on the glass cloth and at last an outer jacket of synthetic rubber is extruded in place onto the tapered **ductors and fused to the underlying barrier layer. Pat. No. 3,602,636. Basically, it makes use of an open weave glass fiber tape wrapped around the clustered **ductors. It relates extra signifi**tly to hearth-retardant insulation in sheet and tape kind for cables that are exposed to the weather and which should have the ability to withstand rough utilization, e.g. a service entrance cable. An outer jacket 18 of a waterproof resinous materials corresponding to polyvinyl chloride, neoprene, or the like, is extruded in situ over the wrapped **ductors, thus **pleting the cable 10. As will likely be seen presently, the tape 14 and jacket 18 together kind a double **tinuous insulating barrier which is **siderably impervious to moisture and the elements.

Also, by virtue of the low viscosity adhesive working up between the glass fibers 22a in the scrim, the tensile power of the tape is definitely enhanced as a result of the adhesive seems to type a buffer between the person fibers 22a, decreasing their tendency to abrade each other. Still another object of the i**ion is to supply a cable tape which has a relatively excessive tensile strength. Still further, the tensile power of the prior cable tape will not be as high because it might be, although it does pass the UL test for this characteristic. The online result is a superior insulating, bedding and binding tape which ** be made at a decrease cost than prior **parable merchandise and which, when integrated into a**erior cable system, enables the latter to simply pass the entire UL assessments for such cables. Exterior cable of this type must fulfill the stri** take a look at necessities of the Underwriters' Laboratories, Inc. For instance, service entrance cable, which is the cable which **ducts electricity from overhead energy traces into a user's home, should move the UL 300 amp. Yet another object of the i**ion is to offer a service entrance cable tape which satisfies the entire UL tests.